The short version
- Amortization pays a loan down to zero with equal payments; negative amortization means the balance grows because payments don’t cover the interest.
- One point = 1% of the loan amount. Discount points buy a lower rate; a 2-1 buydown lowers the rate by 2% in year 1 and 1% in year 2.
- Lien position decides who gets paid first in a foreclosure. Subordination is when a lender agrees to move behind another lien.
- PMI is for conventional loans and can be canceled; MIP is for FHA loans and often lasts for the life of the loan.
The NMLS outline splits these into loan terms, disclosure terms, financial terms, and general terms. This chapter follows the same grouping.
Loan terms
Lien and lien position
- A lien is a legal claim against property as security for a debt. A mortgage (or deed of trust) creates a lien on the home.
- Lien position (priority) is generally set by recording date: first recorded, first paid. The first mortgage is in first lien position; a home equity loan recorded later is usually a second (or “junior” / “subordinate”) lien.
- In a foreclosure, the first lien gets paid in full before the second gets anything. That’s why second mortgages carry higher rates.
- Property tax liens generally take priority over mortgages no matter when they were recorded.
Subordinate loans
A subordinate loan is any loan in a lower lien position (second, third) than another loan on the same property. Piggyback loans and HELOCs are common examples.
Escrow accounts
An escrow account (also called an impound account) is an account the servicer holds to pay the borrower’s property taxes and homeowners insurance (and sometimes mortgage insurance). The borrower pays 1/12 of the yearly amount each month with the mortgage payment.
Key rules under the Real Estate Settlement Procedures Act (RESPA):
- The servicer may keep a cushion of no more than 1/6 of the yearly escrow payments (about 2 months).
- The servicer must do an escrow analysis every year.
- A surplus of $50 or more must be refunded to the borrower within 30 days of the analysis (if the borrower is current).
(The word “escrow” also describes a neutral third party holding money and documents until closing, such as an escrow agent holding an earnest money deposit.)
Tolerances
Under the TILA-RESPA Integrated Disclosure (TRID) rule, tolerances limit how much closing costs on the Closing Disclosure may go up compared with the Loan Estimate:
- Zero tolerance: can’t increase at all (for example, the lender’s own fees, transfer taxes, and services the borrower wasn’t allowed to shop for).
- 10% cumulative tolerance: the total can’t rise more than 10% (for example, recording fees and third-party services the borrower chose from the lender’s list).
- No limit: for example, prepaid interest, homeowners insurance premiums, and services from a provider the borrower picked who isn’t on the lender’s list.
If the lender goes over a tolerance, it must refund the difference.
Rate lock agreement
A rate lock is the lender’s promise to hold a specific interest rate (and points) for a set period, such as 30, 45, or 60 days, while the loan is processed. If the loan doesn’t close before the lock expires, the rate may change or the borrower may pay an extension fee. A float means the borrower hasn’t locked yet and the rate can still change.
Table funding
Table funding is when a loan closes in the name of the mortgage broker (or another party) but is funded at the closing table by the lender’s money, and the loan is immediately assigned to that lender. Under RESPA, a table-funding broker is not treated as the true lender for the transaction.
Disclosure terms
Yield spread premium (YSP) and lender credits
- A yield spread premium was a payment a lender made to a broker for delivering a loan with an interest rate higher than the lowest rate the borrower qualified for. Loan originator compensation rules in Regulation Z (effective 2011 and updated 2014) now prohibit paying an originator based on the loan’s interest rate or other terms, which ended YSP as a way to pay originators.
- A lender credit is money the lender gives the borrower toward closing costs in exchange for a higher interest rate. It’s the opposite of discount points. Lender credits appear on the Loan Estimate and Closing Disclosure.
Federally related mortgage loans
RESPA covers federally related mortgage loans: basically any loan secured by a first or subordinate lien on 1–4 family residential property that involves a federally insured or regulated lender, a government program (FHA, VA, USDA), or a loan intended to be sold to Fannie Mae, Freddie Mac, or Ginnie Mae. In practice, almost every residential mortgage.
Servicing transfers
When the right to service a loan moves to a new company, RESPA requires notice to the borrower:
- The old servicer must notify the borrower at least 15 days before the transfer’s effective date.
- The new servicer must notify the borrower within 15 days after the transfer.
- The two notices can be combined and sent at least 15 days before the transfer.
- For 60 days after the transfer, a payment sent to the old servicer on time can’t be treated as late.
Financial terms
Discount points
- 1 point = 1% of the loan amount. On a $300,000 loan, 1 point = $3,000.
- Discount points are prepaid interest the borrower pays at closing to get a lower interest rate (“buying down the rate”).
- Origination points (origination fees) pay the lender for making the loan; they don’t lower the rate.
2-1 buydown
A temporary buydown lowers the borrower’s payment for the first years:
- Year 1: rate is 2% below the note rate.
- Year 2: rate is 1% below the note rate.
- Year 3 on: the full note rate.
Example: a 7% note rate becomes 5% in year 1, 6% in year 2, and 7% after that. Someone (often the seller or builder) pays the cost up front into a subsidy account. A 3-2-1 buydown works the same way over 3 years.
Loan-to-value (LTV) ratio
LTV = loan amount ÷ the lower of the appraised value or purchase price. A $270,000 loan on a $300,000 home = 90% LTV. Higher LTV = more risk for the lender. (The math section covers LTV, CLTV, and HCLTV in detail.)
Accrued interest
Mortgage interest is paid in arrears: the payment due June 1 covers interest for May. Interest that has built up but hasn’t been paid yet is accrued interest. That’s why, at closing, the borrower prepays interest from the closing date to the end of that month (prepaid or per diem interest), and why the first payment isn’t due until the first of the month after next.
Finance charge
Under TILA, the finance charge is the cost of consumer credit as a dollar amount: interest plus certain fees the borrower pays as a condition of getting the loan (such as points, origination fees, and mortgage insurance).
Daily simple interest
Interest is calculated each day on the actual outstanding balance: balance × annual rate ÷ 365 (or 360). Paying early saves interest; paying late costs more. Common with HELOCs and some other loans.
Amortization
- Amortization is paying off a loan with regular payments that cover interest and principal, so the balance reaches zero by the end of the term.
- In early years, most of each payment is interest; later, most is principal.
- A fully amortizing payment pays the loan off by its maturity date.
Negative amortization
When the payment is less than the interest due, the unpaid interest is added to the principal, and the balance grows. Payment-option ARMs and payment-capped ARMs can cause it. QMs can’t have negative amortization.
General terms
Subordination
Subordination is when a lender agrees in writing (a subordination agreement) to put its lien behind another lien, even if it was recorded first.
Common example: a borrower has a first mortgage and a HELOC and wants to refinance the first mortgage. The new loan would be recorded after the HELOC, making it second. The refinancing lender requires the HELOC lender to subordinate so the new loan stays in first position.
Conveyance
Conveyance is transferring ownership (title) of real property from one party to another, usually by a deed.
Primary and secondary market
- Primary market: where lenders make loans directly to borrowers.
- Secondary market: where existing loans are bought and sold (for example, lenders sell loans to Fannie Mae or Freddie Mac). See the next chapter.
Third-party providers
Companies other than the lender and borrower that provide services for the loan: appraisers, title companies, credit reporting agencies, flood certification companies, pest inspectors, surveyors, and settlement agents.
Assumable loan
An assumable loan lets a buyer take over the seller’s existing mortgage, with the same rate, balance, and remaining term.
- FHA and VA loans are generally assumable if the buyer qualifies (and the lender or agency approves).
- Most conventional loans are not assumable because they contain a due-on-sale clause (also called an alienation clause), which lets the lender demand full payment if the property is sold or transferred.
- Unless the lender formally releases the seller (a release of liability, or on VA loans a substitution of entitlement), the seller may remain liable if the buyer defaults.
APR (annual percentage rate)
The APR is the cost of credit expressed as a yearly rate, including the interest rate plus certain fees (the finance charge). It’s usually higher than the note rate and lets borrowers compare loans apples-to-apples.
Prepayment penalty
A fee the lender charges if the borrower pays off the loan (or a large part of it) early, for example by selling or refinancing. They are heavily restricted today: allowed only on certain fixed-rate QMs that aren’t higher-priced, capped at 2% (years 1–2), 1% (year 3), and none after 3 years. Government loans (FHA, VA, USDA) don’t allow them.
PMI vs. MIP
| PMI (private mortgage insurance) | MIP (mortgage insurance premium) | |
|---|---|---|
| Loan type | Conventional | FHA |
| Who provides it | Private insurance companies | FHA (the government) |
| Up-front charge | Usually none (monthly) | 1.75% up-front + annual |
| When it ends | Request at 80%, auto at 78% of original value, or midpoint of term | 11 years if original LTV ≤ 90%; otherwise life of loan |
| Protects | The lender | The lender |
Numbers to memorize
| Item | Number |
|---|---|
| 1 discount point | 1% of the loan amount |
| 2-1 buydown | −2% year 1, −1% year 2, full rate year 3 |
| Maximum escrow cushion | 1/6 of annual escrow disbursements (≈ 2 months) |
| Escrow surplus refund threshold | $50 or more, refunded within 30 days |
| TRID tolerance buckets | 0%, 10% cumulative, unlimited |
| Servicing transfer notice (old servicer) | At least 15 days before the transfer |
| Servicing transfer notice (new servicer) | Within 15 days after the transfer |
| Grace period for payments sent to old servicer | 60 days |
| Prepayment penalty caps (QM) | 2% / 2% / 1% / 0 (years 1, 2, 3, 4+) |
| PMI cancellation | Request at 80%; automatic at 78% |
| FHA MIP | 1.75% up-front; annual MIP 11 years or life |
Memory tricks
- “Point = Percent.” One point, one percent.
- “2-1, done.” Two percent off, then one percent off, then done.
- Negative amortization = “negative progress.” You pay, and you owe more.
- Subordination = “sub” = under. The lender agrees to go under.
- Lender credits are “reverse points.” Points: pay now, lower rate. Credits: get money now, higher rate.
- “Old 15 before, new 15 after, 60 days of grace.” Servicing transfers.
- PMI = Private; MIP = FHA’s “My Insurance Premium.” PMI can leave; MIP often stays.
Watch out on the exam
- “Who does PMI protect?” The lender. Always.
- “Discount points lower the loan amount.” No. They lower the interest rate.
- APR vs. interest rate: APR includes fees; it’s usually higher than the note rate.
- Lien priority is generally by recording date, not by loan size or date signed.
- A subordination agreement is signed by the lender that is moving to a lower position.
- Most conventional loans aren’t assumable because of the due-on-sale clause. FHA and VA loans are.
- Table funding: the loan closes in the broker’s name but with the lender’s money.
- Interest is paid in arrears. A payment on July 1 pays June’s interest.