The short version
- Most wrong answer choices are built from predictable mistakes. If you know the traps, you can spot the bait.
- The biggest trap is the wrong base: always ask “percent of what?” before you multiply.
- Round only at the end, and round in the direction that makes sense: up for minimums and break-even months, down for maximums.
- Watch annual vs. monthly and percent vs. percentage points.
Trap 1: The wrong base
Every percentage is a percent of something. Here’s the right base for each calculation:
| Calculation | Correct base (the “whole”) | Common wrong base |
|---|---|---|
| LTV (purchase) | Lesser of price or appraised value | Whichever is higher, or the loan |
| Loan amount | Lesser of price or appraised value | Always the price |
| Down payment % | Sales price | Loan amount |
| Points and origination fees | Loan amount | Sales price |
| PMI / MIP | Loan amount | Sales price |
| FHA upfront MIP | Base loan amount | Price, or loan with the MIP already added |
| DTI | Gross monthly income | Net (take-home) income |
| 10% tolerance limit | Loan Estimate total | Closing Disclosure total |
| ARM lifetime cap | Start rate | Current rate |
| Seller concessions | Sales price (or value) | Loan amount |
Worked example: points on the right base
A buyer purchases a $350,000 home with 10% down and pays 2 points.
- Loan = $350,000 × 0.90 = $315,000
- Points = $315,000 × 0.02 = $6,300
Trap answer: $350,000 × 0.02 = $7,000.
Trap 2: Reverse percentages
If you know the result after a percent was taken, you divide to get back to the original. Don’t just add the percent back.
Worked example: undoing a decrease
A home sold for $190,000, which was 5% less than the original list price. What was the list price?
- $190,000 is 95% of the list price (100% − 5% = 95%)
- List price = $190,000 ÷ 0.95 = $200,000
Trap answer: $190,000 × 1.05 = $199,500.
Worked example: loan back to value
A $342,000 loan is 90% of the value. What’s the value?
- Value = $342,000 ÷ 0.90 = $380,000
Trap answer: $342,000 × 1.10 = $376,200.
Trap 3: Rounding in the wrong direction
- Break-even months: round up. 47.2 months → 48 months.
- Minimum income or minimum down payment: round up, so the requirement is actually met.
- Maximum loan or maximum payment: round down, so the limit isn’t exceeded.
- Money in general: nearest cent.
Worked example: maximum loan rounds down
The maximum P&I is $1,625 and the payment factor is 6.65 per $1,000.
- Maximum loan = $1,625 ÷ 6.65 × 1,000 = $244,360.90
- The maximum loan must not go over the limit: $244,360 (rounded down to the dollar)
Worked example: break-even rounds up
Points cost $3,540 and save $75 per month.
- Break-even = $3,540 ÷ $75 = 47.2 months
- Round up: 48 months
Trap 4: LTV just over a limit
An LTV of 80.01% is over 80%. Don’t round down to squeeze under a limit.
Worked example: just over 80%
Value $300,000. Loan $240,500.
- LTV = $240,500 ÷ $300,000 = 0.80167
- 0.80167 × 100 = 80.17%, which is over 80% (PMI would typically be required on a conventional loan)
Trap 5: Annual vs. monthly
Rates, taxes, insurance premiums, and PMI rates are usually annual. Payments, income for DTI, and debts are monthly. Mixing them produces answers 12 times too big or too small.
Worked example: annual taxes in a monthly payment
P&I is $1,400. Annual taxes are $3,000. Annual insurance is $1,200.
- Monthly taxes = $3,000 ÷ 12 = $250
- Monthly insurance = $1,200 ÷ 12 = $100
- PITI = $1,400 + $250 + $100 = $1,750
Trap answer: $1,400 + $3,000 + $1,200 = $5,600.
Trap 6: Percent vs. percentage points
- A rate going from 6% to 7% rose 1 percentage point.
- The same change is a 16.67% increase (1 ÷ 6 = 0.1667).
- “The rate increased by 25 basis points” means +0.25 percentage points.
Worked example: rate increase
A 6.5% rate increases by 0.75 percentage points.
- New rate = 6.5% + 0.75% = 7.25%
Trap answer: 6.5% × 1.0075 = 6.549% (treating it as a 0.75% increase of 6.5%).
Trap 7: Pay frequency
- Biweekly = every two weeks = 26 pay periods → × 26 ÷ 12
- Semi-monthly = twice a month = 24 pay periods → × 2
Worked example: same paycheck, different schedules
A paycheck of $2,000.
- Biweekly monthly income = $2,000 × 26 ÷ 12 = $4,333.33
- Semi-monthly monthly income = $2,000 × 2 = $4,000
- Difference = $4,333.33 − $4,000 = $333.33 per month
Trap 8: Day counting
- Count the closing day when figuring prepaid interest: days = days in month − closing date + 1.
- Know which months have 30 days (April, June, September, November) and remember February.
Worked example: February closing
A loan closes February 20 in a non-leap year. How many days of prepaid interest?
- Days = 28 − 20 + 1 = 9 days
A quick “sanity check” routine
Before picking an answer, ask:
- Is the size reasonable? Points on a $300,000 loan should be thousands, not hundreds of thousands.
- Did I use the right base? Loan, price, or value?
- Is everything in the same time unit? All monthly, or all annual?
- Did I round in the right direction, only at the end?
Numbers to memorize
| Item | Number or rule |
|---|---|
| Round break-even months | Up |
| Round minimum income or down payment | Up |
| Round maximum loan or payment | Down |
| Money | Nearest cent |
| 1 percentage point | 100 basis points |
| Biweekly periods per year | 26 |
| Semi-monthly periods per year | 24 |
Memory tricks
- “Of what?” Say it out loud (in your head) before every percent calculation.
- “Divide to undo.” Reversing a percentage always means dividing by the percent that remains.
- “Max rounds down, min rounds up.”
- “Twelve times too big?” If your answer is huge, you probably forgot to divide an annual number by 12.
Watch out on the exam
- Answer choices built from mistakes. If your answer matches a choice, double-check the base anyway. The trap answers are real numbers from real mistakes.
- “Percent of the loan” vs. “percent of the price.” Read every word.
- Rounding early. Keep all the digits until the last step.
- “Increase by X percentage points” vs. “increase by X%.” They’re different.