Learn / Mortgage Math · Chapter 10 of 14

ARM Calculations: Index, Margin, and Caps

Fully indexed rate = index + margin, and how initial, periodic, and lifetime caps limit each adjustment on an adjustable-rate mortgage.

The short version

ARM vocabulary

An adjustable-rate mortgage (ARM) has an interest rate that can change after an initial fixed period.

Fully indexed rate = Index + Margin

Worked example: fully indexed rate

The index is 4.25% and the margin is 2.75%.

  1. Fully indexed rate = 4.25% + 2.75% = 7.00%

Rate caps

Caps protect the borrower from huge jumps.

Cap What it limits
Initial adjustment cap How far the rate can move at the first adjustment, compared with the start rate
Periodic (subsequent) cap How far the rate can move at each later adjustment, compared with the rate just before it
Lifetime cap The most the rate can ever rise above the start rate

Reading a cap structure: the three numbers are always in the order initial / periodic / lifetime.

On most ARMs the caps limit movement down as well as up, and the note sets a floor (a minimum rate).

Finding the new rate at an adjustment

Step 1: Fully indexed rate = Index + Margin

Step 2: Cap limit = Current rate ± Initial cap (first adjustment) or Periodic cap (later ones)

Step 3: Lifetime ceiling = Start rate + Lifetime cap

Step 4: New rate = the fully indexed rate, but no higher than the cap limit and no higher than the lifetime ceiling (on the way up, take the lowest of the three)

Worked example 1: a 2/2/5 ARM over three adjustments

Start rate 5.00%. Margin 2.50%. Caps 2/2/5.

Lifetime ceiling: 5.00% + 5% = 10.00%

First adjustment (index 5.25%):

  1. Fully indexed = 5.25% + 2.50% = 7.75%
  2. Initial cap limit = 5.00% + 2% = 7.00%
  3. New rate = lowest of 7.75%, 7.00%, 10.00% → 7.00% (the initial cap stops it)

Second adjustment (index 5.75%):

  1. Fully indexed = 5.75% + 2.50% = 8.25%
  2. Periodic cap limit = 7.00% + 2% = 9.00%
  3. New rate = lowest of 8.25%, 9.00%, 10.00% → 8.25% (no cap needed)

Third adjustment (index 8.00%):

  1. Fully indexed = 8.00% + 2.50% = 10.50%
  2. Periodic cap limit = 8.25% + 2% = 10.25%
  3. New rate = lowest of 10.50%, 10.25%, 10.00% → 10.00% (the lifetime cap stops it)

Worked example 2: a 5/2/5 ARM, up then down

A 5/1 ARM starts at 6.25% with a 2.75% margin and 5/2/5 caps.

Lifetime ceiling: 6.25% + 5% = 11.25%

First adjustment (index 6.00%):

  1. Fully indexed = 6.00% + 2.75% = 8.75%
  2. Initial cap limit = 6.25% + 5% = 11.25%
  3. New rate = 8.75% (under both limits)

Second adjustment (index falls to 3.00%):

  1. Fully indexed = 3.00% + 2.75% = 5.75%
  2. Periodic cap limit going down = 8.75% − 2% = 6.75%
  3. New rate = 6.75% (the periodic cap limits the drop, too)

Worked example 3: worst-case rate

An ARM starts at 4.875% with a 5% lifetime cap. What’s the highest the rate can ever go?

  1. Maximum rate = 4.875% + 5% = 9.875%

Qualifying a borrower for an ARM

Under the Ability-to-Repay rule, a lender generally must figure the borrower’s payment using the greater of the fully indexed rate or the introductory rate, not just the low teaser rate.

Worked example: which rate to qualify at

Teaser rate 5.5%. Index 3.9%. Margin 2.75%.

  1. Fully indexed rate = 3.9% + 2.75% = 6.65%
  2. Greater of 5.5% and 6.65% → qualify at 6.65%

Numbers to memorize

Item Number or rule
Fully indexed rate Index + Margin
Cap order Initial / Periodic / Lifetime
Lifetime cap measured from The start rate
Maximum rate Start rate + Lifetime cap
5/1 ARM Fixed 5 years, then adjusts every 1 year
5/6 ARM Fixed 5 years, then adjusts every 6 months
Qualifying rate (ATR rule) Greater of fully indexed or introductory rate

Memory tricks

Watch out on the exam